amperes
PD1240 Digital Paging Microphone
PAGE 7
Operating The Unit
Technical Data
Select the zone for paging
Select the individual zone for paging or as group or ALL CALL,
LEDs at the switches shall lit accordingly.
Press
Chime
+ Talk
button to page
A 4 tone upward chime shall be broadcasted to the zones selected.
This shall be followed by activation of gooseneck mic, indicated by
LED ring near the mic capsule. The console is now ready for
paging.
Press Chime + Talk button
to end
A 4 tone downward chime shall be broadcasted to the selected
zones.
LED ring turned off and the console is deactivated.
PD1240
24V DC via EX2800 with local power adaptor
1.2W
24 zone keys, Group, All Call
Sensor touch keypad
Gooseneck condenser capsule; unidirectional
600 Ohm
Chime, mic volume
RS485; 19.2 kbps
2 pair screen; 22 AWG / Cat 5e decoder
500m subject to cable size
MxP2188, TD6240, TD6080
4 tone up and 4 tone down
Zones, power, audio, data, gooseneck ring LED
NIL
100 - 12 kHz
Appr. 1.6kg
>65 dB @ 1 KHz
230 x 192 x 65 mm (Excluding Mic)
Operating voltage
Power Consumption
Zone Selection
Switching selection
Microphone
Output impedance
Output level
Output controls
Data connections
Cabling to decoder
Recommended operating distance
Compatible interfacing device
Chime
Indicators
Displays
Frequency response
S / N ratio
Gooseneck mic length
Dimension (W x H x D)
Weight
1.2V balanced line output
400 mm
All Call Paging with 24V Override
Pressing ALL CALL from PD1240 shall activate all the zones at the zone selectors. If any volume controllers are
installed in the particular zone and is switched off, this feature shall not override the VC. This is to avoid unneces-
sary interruption to the areas concerned, especially Emergency or Privacy Zones, such as Boardroom, Prayer Hall,
Function Hall, etc.
To override the volume controllers during emergency, use EP1200A installed at the rack. Please refer to ZS manual
to make necessary connection.
