background image

Warranty Conditions

Disclaimer

AMPERES ELECTRONICS SDN BHD

MADE IN MALAYSIA

Published : December 2016

ISO 9001: 2008

Design & Manufacture of Public Address Equipment and Systems

Certificate No. 16895 / A / 0001 / UK / En

Information contained in this manual is subject to change without prior notice and does not represent a 

commitment on the part of the vendor. AMPERES ELECTRONICS SDN BHD  shall not be liable for any loss or 

damages whatsoever arising from the use of information or any error contained in this manual.

It is recommended that all services and repairs on this product be carried out by AMPERES ELECTRONICS SDN 

BHD or its authorized service agents.

AMPERES series must only be used for the purpose they were intended by the manufacturer and in conjunction 

with this operating manual.

AMPERES ELECTRONICS SDN BHD cannot accept any liability whatsoever for any loss or damages caused by 

service, maintenance or repair by unauthorized personnel, or by use other than that intended by the manufacturer.

Only Amperes Electronics Service Centres are allowed to make warranty repairs : a list of Amperes Electronics 

Service Centres may be asked for by the purchaser or send directly to Amperes Electronics Sdn Bhd at 70 Jalan 

Industri PBP 3, Tmn Perindustrian Pusat Bandar Puchong, 47100, Puchong, Selangor, Malaysia or its authorized 

dealers. This warranty is not valid if repairs are performed by unauthorized personnel or service centres.

This warranty covers only repairs and replacement of defective parts ; cost and risks of transportation as well as 

removal and installation of the product from the main system are for the account of the purchaser. This warranty 

shall not extend to the replacement of the unit.

This warranty does not cover damages caused by misuse, neglect, accident of the product as well as using the 

product with power supply voltage other than shown on the product, or any other power supply source / adaptor 

not recommended by the manufacturer.

This warranty does not cover damages caused by fire, earthquakes, floods, lightning and every cause not directly 

related to the unit.

This warranty does not include any indemnity in favor of the purchaser or the dealer for the period out of use of the 

unit; moreover the warranty does not cover any damages which may be caused to people and things when using 

the product.

This warranty certificate is valid only for the described product, and is not valid if modifications are made on this 

certificate or on the identification label applied on the product.

This warranty covers all the material and manufacturing defects and is valid for a period of 36 months from the 

date of purchase or for a specified period in countries where this is stated by a national law. In this case, the 

extension is valid only in the country where the product is purchased.

Amperes Electronics Sdn Bhd is not obliged to modify previously manufactured products under warranty if the 

design changes or improvements are made.

Summary of Contents for BC9740









Reviews: