4
GND (GROUND CONNECTION)
For connection to the chassis’ ground. For optimum performance 0 gauge cable is recommended.
REM (REMOTE)
Connect to sw12V from the head unit.
+12V / B+ (POWER CONNECTION)
For connection to the positive terminal of the battery (+12).
For optimum performance 0 gauge cable is recommended.
SPEAKER OUTPUTS
Amplifier connection to the loudspeakers.
Minimum speaker cable is 12 gauge.
Minimum impedance for single unit is 1 .
Minimum impedance in linked connections is 2 .
Installation of the amplifier should be done in the folling steps:
1. Ensure that the ground is appropriate, then connect it to the amplifier.
2. Next step is to connect the +12V wire. Ensure all power terminals are used.
This cable has to be fused at the battery for safety precautions.
3. The final step is connecting the switched remote.
CAUTION
+12V(B+), GND, REM
(Model : AA-1000.1D)
B
A
B+
REM
GND
POWER
FUSE
SPEAKER
POWER
SPEAKER
GND
REM
B+
Caution
This amplifier is not supplied
with internal fuse in itself.
Make sure you install in-line
fuse holder from
the terminal of battery.
(Model : AA-2000.1D / AA-3800.1D)
