manualshive.com logo in svg

Amped Wireless HighPower AC1750, Setup Manual, Page: 5 / 64

Share
Download
Amped Wireless HighPower AC1750 Setup Manual Download Page 5

 

LED INDICATORS 

From left to right: 

 

 

PoE:

 Indicates when there is an active PoE connection on the LAN1 wired port. LED will remain on. 

USB:

 Indicates when there is a USB device is attached to the USB port. 

5.0GHz Wi-Fi:

 Blinks rapidly when Wi-Fi data traffic is transmitted or received over the wireless network. 

2.4GHz Wi-Fi:

 Blinks rapidly when Wi-Fi data traffic is transmitted or received over the wireless network. 

Wired Port 2: 

Indicates when a networking device is connected to wired port (LAN2) on the Range Extender / 

Bridge. The LED will blink rapidly when wired data traffic is transmitted or received.

 

Wired Port 1:

 Indicates when a networking device or modem is connected to wired port (LAN1) on the Range 

Extender / Bridge. The LED will blink rapidly when wired data traffic is transmitted or received. 

Status: 

Blinks when the Range Extender / Bridge is booting up or resetting. 

Power (PWR):

 Indicates when the Range Extender / Bridge is powered on. The LED will remain on.

 

 

Summary of Contents for HighPower AC1750

































































Reviews:

No comments