23
MAN3037-2
XP95 PRODUCT GUIDE
14
Approvals & Regulatory Compliance
The XP95 range of detectors and manual call points is approved by a large number of third party certification
bodies around the world. These include detector approvals to EN54:2000 with LPCB, VdS, DIBT, BOSEC
and FG and to UL 268 and 521 with UL.
XP95 detectors comply with the requirements of a number of European New Approach Directives, such as
the EMC Directive 89/336/EEC and the Construction Products Directive 89/106/EEC.
All XP95 products will comply with the marking requirements of the WEEE Directive, 2002/96/EC.
15
EMC
All XP95 detectors and manual call points comply with the requirements of the following EMC standards:
Generic Emission Standard EN 61000-6-3
Emission standard for residential, commercial and light industrial environments.
Generic Emission Standard EN 61000-6-4
Emission standard for industrial environments.
EN 50130-4 : Alarm Systems
Electromagnetic compatibility - product family standard Immunity
requirements for components of fire, intruder and
social alarm systems
EN 6100-4-2
Electrostatic discharge
EN 6100-4-3
Radiated immunity
EN 6100-4-4
Fast transient bursts
EN 6100-4-5
Surge immunity
EN 6100-4-6
Conducted immunity
In addition, all of the XP95 detectors have been assessed to the additional VdS EMC requirements, which
are shown below and have been demonstrated full compliance.
Additional VdS requirements: 30V/m with 80% Am sine and 100% pulse modulation depth over the
frequency ranges 415 to 467MHz and 890 to 960MHz.
& REGULATORY COMPLIANCE
16
Acknowledgement
The XP95 range of detectors and products are manufactured for Ampac by Apollo Fire Detectors Ltd.
UNCONTROLLED DOCUMENT
NOTE: Due to AMPAC’s commitment to continuous improvement specifications may change without notice.
