![Ampac FireFinder Series II AS442 Installation & Operation Instruction Download Page 28](http://html.mh-extra.com/html/ampac/firefinder-series-ii-as442/firefinder-series-ii-as442_installation-and-operation-instruction_2934086028.webp)
Page 23
FIREFINDER SERIES II
INSTALLATION,
COMMISSIONING
&
OPERATION
5
FireFinder Control Panel
Figure 27:
The FireFinder™ Control Panel with a 4 Line LCD
FIRFIGHTER FACILITY
ALARM
(Red):
This LED will flash if any unacknowledged alarms are present on the system. If
all alarms have acknowledged it will light steady.
FAULT
(Yellow):
This LED will light steady if there are any faults on the system, whether they
are loop faults, module faults, device faults etc.
ISOLATED
(Yellow):
This LED will light steady if any detectors, devices or zones in the system
have been isolated.
EXTERNAL BELL
ISOLATE
(Yellow):
Pressing this button will isolate any bells connected to the fire panel If the
bell is isolated the LED just above the button will glow steady yellow. Pressing the button again will
de-isolate the bell.
WARNING SYS
ISOLATE
(Yellow):
Pressing this button will isolate the FACP output to the Warning System if it
is connected to one. Pressing the button again de-isolates the Warning System output. When the
Warning System is isolated the LED just above the button will be illuminated steady.
PREVIOUS
Pressing this key scrolls the display backwards through the alarms, faults, or isolates.
NEXT
Pressing this key scrolls the display forwards through alarms, faults, or isolates.