1: Introduction
MPEG4000-D4 Hardware Reference Manual
© 2011 Advanced Micro Peripherals
Document version A.01
1
12
Ordering information
The following part number(s) can be used when ordering:
MPEG4000-D4
4 channel MPEG-4 video encoder.
MPEG4000-D4-EXT
Extended temperature (-40ºC to +85ºC) 4 channel
MPEG-4 video encoder.
Cable-MP4D4
750mm A/V breakout cable.
Anti-static handling
The board(s) supplied contain electrostatic components that are susceptible to
permanent damage from electrostatic discharge (static electricity). To prevent
electrostatic discharge, the boards are supplied in anti-static packaging.
When handling a board, observe the following anti-static precautions to alleviate
risk of damage:
▪
Remove the board(s) from the packaging only when you are working on an
anti-static, earthed surface and wearing an anti-static wrist strap.
▪
Retain the anti-static packaging that the board(s) were supplied in. If you
remove a board from a system, store it in this packaging.
RoHS compliance
The European RoHS Directive (Restriction on the use of certain Hazardous
Substances – Directive 2002/95/EC) limits the amount of six specific substances
within the composition of the product. The MPEG4000-D4 is RoHS compliant.
Related documentation
The following documentation and software may be of use whilst reading this
guide:
▪
Video Recording SDK Software Reference Manual for MPEG4000-D4, VCODEC-
H264-D4, microMPEG4-D4 and microH264-D4.
▪
Video Streaming SDK Software Reference Manual for MPEG4000-D4, VCODEC-
H264-D4, microMPEG4-D4 and microH264-D4.
