For Technical Support, Contact AMP
at (775) 345-9933 (9 am - 5 pm PST)
Advanced Microwave Products
PO Box 1437
2465 Old Highway 40 West, Suite 200
Verdi, NV 89439
Connect Antenna to SMA Connector
Connect camera/video input source to SSMA connector
Connect audio inputs to MDM-9S connector (if
applicable) *see reverse side
Set configuration *see reverse side
STEP
STEP
STEP
STEP
STEP
Connect power/communications inputs to the
MDM-9P connector *see reverse side
Note
When setting up your system, the transmit and receive
antennas should be greater than 25 feet apart to
prevent serious damage to or destruction of the
receiver’s front end
EST1 Transmitter Quick Start Guide
