Professional,
Creditable,
Successful
DMT80600T104-31WT User Guide
www.ampdisplay.com [email protected]
12
Step 4
3.13 Connect to PC
: Write command in
Android Serial Port Tool
to see if corresponded correctly in
SSCOM32
. Oppositely, you are
allowed to have reversed operation which is command composing in SSCOM32 but monitoring if received in
Android
Serial Port Tool
.
Step 1
: Set the status of the “USB 0 interface” as “
OFF
” refer to the
USB0 interface
in the chapter 2. As shown in PIC 6.
PIC 6
Step 2
: Connect the Android screen to the PC with Male-to-Male USB cable;
Step 3
: Check the “Device Manager” on the PC, whether the “
Android device
” is detected; Please try again after
installing the driver if there is nothing detected;
Step 4
: For the driver download, please connect the PC to the internet, download and install the software “Snap Pea”;
Step 5
3.14 Backup & Reset
: Reconnect and check the detection status. The connection is successful if the “Android device” is found.
Open
Settings >Backup and Reset >personal
, there are two options:
Factory data reset
and
System Upgrade
. Note:
USB 0
ON=USB0 HOST
OFF=USB0 DEVICE
