Professional,
Creditable,
Successful
DMT80600T104-31WT User Guide
www.ampdisplay.com [email protected]
11
Step 2
: Copy the folder “DWIN_SET” to the root directory of U disk or SD card, and then insert the U disk or SD card
into the product. After the system reads the file “CONFIG.TXT”, the touch-screen calibration starts;
Step 3
: Click the screen according to the cross line shown as “+”;
Step 4
: After finishing the calibration, the system will automatically return to the picture before the calibration.
3.12 Serial Testing
Note: applies only to a resistive touch panel
Test the communication between the Android product and the computer:
Step 1
: Connect the UART0 of Android to the user's computer via a serial cable;
Step 2
: Open “
Android Serial Port Tool
” with COM0 selected as communication port, The Port 1, 2, 4 on
UART1&2&4 are in accordance with COM1, COM2, and COM4. Then, check on options in baud rate, data, stop,
checksum and click “CLOSE” for activating status of serial port. As shown in PIC 5.
PIC 5
Step 3
:
Open serial-debugger
SSCOM32
and check serial number, baud rate, and data in options according to Device
Manager in purpose of staying the same set as
Android Serial Port Tool
;
