background image

www.amp-research.com

1/10

IM77105 rev 01.13.20

I N S T A L L A T I O N   G U I D E

        

3-5 Hours

Professional installation recommended

Invented, engineered and manufactured exclusively by AMP Research in the USA. May be covered by one of the following patents:  

6,641,158; 6,830,257; 6,834,875; 6,938,909; 7,055,839; 7,380,807; 7,398,985; 7,584,975   ©2012 AMP Research. All rights reserved.    

Printed in USA.

TOOLS REQUIRED

Safety goggles

Measuring tape

10 mm socket

13 mm socket                               

1/2” socket                   

Ratchet wrench and extension

Wire crimpers 

Wire stripper / cutter

 

3/16” hex key wrench (allen wrench)

4mm hex key wrench ( allen wrench )

Electrical tape

Weather proof caulking (silicone sealer)

Silicone spray

INSTALLATION TIME

 

1 2 3

4

SKILL LEVEL

4= Experienced

AMP RESEARCH TECH SUPPORT 1-888-983-2204 (Press 2) Monday - Friday, 7:00 AM - 5:00 PM PST

APPLICATION   

 

 

 

 

 

 

                     

 AMP Part # 

 

 

Ford F150   - SuperCrew  2004-2008                                                         77105-01A                     

5-Year Limited Warranty

WARRANTY

Note:The application works only on the Super Crew model Vehicles.

Summary of Contents for 77105-01A












Reviews: