www.amp-research.com
7/10
IM75135 rev 07.30.19
A M P R E S E A R C H P O W E R S T E P
T M
– J e e p W r a n g l e r J L
Remove sill plate cover. Remove grommet under floor and route trigger wires and power wire thru
grommet.
Route the two Wire
Harness legs down over the
wheel wells toward Motor
Linkages, long leg across
to the driver side. Secure
harness with tie wraps.
Insert
Tighten
Strip 3/8”
Insert and
Tighten
Splice Power Step trigger wires into the Door Ajar wires with provided Posi-Tap
TM
splicers. The
Power Step trigger wires color coordinate with the factory Door Ajar wires. Follow the steps below
to correctly splice wires.
1
9
5
10
8
Summary of Contents for 75135-01A
Page 12: ......
