[email protected] • 813.978.3900
–5–
INSTALLATION & MAINTENANCE GUIDE
4
5
AMP
®
Built-In Hub Base with Stake Mount
VAC-ZWM1-BBZ
Install Stake
Install Stake Mount
Determine the desired location
for mounting the stake mount.
Hammer the stake into the
ground until flange of stake is
flush to grade. To avoid damage
to the stake, place a board on top
of the stake while hammering.
Note: If the ground is hard and
the stake is difficult to install,
make a crosscut in the ground
using a flat shovel.
Board
Ground
Soil
Stake
Clear away an area in the ground
at the wireway slot on top of
the stake. Lay the supply wires
into the wireway slot and screw
the stake mount on to the stake.
Tighten until snug.
Stake Mount
Ground
Supply Wires
Wireway Slot
Soil
Stake
