INSTALLATION & MAINTENANCE GUIDE
–6–
w w w. a m p l i g h t i n g . c o m
–6–
[email protected] • 813.978.3900
–7–
AMP
®
LocketPro Mini Hanging Light (Lamp-Ready)
ASI-9007-4036-B-BZ
5
Attach Fixture to Mounting Bracket
Supply Wires
Fixture Chain
Fixture
Mounting
Bracket
Chain Link
Ceiling Loop
Adjust the fixture chain to the desired
length by removing the links if needed.
(Note: Pliers are required for this step).
With the fixture chain unattached to the fix
-
ture loop on top of the fixture body; or the
ceiling loop on the underside of the mount
-
ing bracket, pull the supply wires through
the fixture chain alternating between the
links.
After the wires are through the fixture
chain, pull the supply wires up and around
the backside of the mounting bracket.
Attach one end of the fixture chain to the
fixture loop at the top of the fixture body.
Lift the fixture body and fixture chain up
and attach the other end of the fixture chain
onto the ceiling loop on the bottom of the
mounting bracket with the chain link.
The fixture will now hang safely. Close the
chain loop at the ceiling loop.
6
Adjust Fixture
Adjust the fixture chain to the desired length by removing the links if
needed. (Note: Pliers are required for this step).
With the fixture chain unattached to the ceiling loop remove the links
to create the length needed. Then, pull the supply wire from the fixture
through the chain alternating between the links.
After the wire is through the chain, pull the additional wire through the
mounting bracket.
Attach the fixture chain to the ceiling loop using the chain link.
7
Wire Connections
Fixture
Pigtail
Transformer
(Sold Separately)
Supply Wire
Strip both leads from the luminaire
pigtail. Connect the leads from the
luminaire supply cable to the trans-
former (sold separately).
