INSTALLATION & MAINTENANCE GUIDE
–4–
w w w. a m p l i g h t i n g . c o m
–4–
2
1
[email protected] • 813.978.3900
–5–
AMP
®
LocketPro Mini Hanging Light (Lamp-Ready)
ASI-9007-4036-B-BZ
Remove Shade
Install Bi-Pin Brass Puck Light
Fixture
Bottom Shade
Screw
Use a screwdriver to remove
the screws from under the
fixture. Then take off the
bottom shade.
Fixture
Insert the Bi-Pin brass puck light
into the socket and secure with the
two screws provided. Tighten with a
screw driver.
CAUTION: This fixture is for LED use
only. Do not exceed maximum watt
-
age marked on luminaire label.
NOTE: DO NOT touch the Bi-Pin brass
puck light with bare hands. Use soft
cloth to handle the puck light.
Socket
Screw
Bi-Pin Puck Light
Bi-pin Puck Light
Holes on Bi-pin Puck Light
Holes on
Mounting
Plate
ROTATE
TIPS: If the holes on the Bi-Pin
puck light do not align to the
holes on the mounting plate
after installation, rotate the
Bi-Pin puck light slightly to
line the holes up and then
secure with screws.
3
Re-install Shade
Fixture
Bottom
Shade
Screw
Place the bottom back onto the fix
-
ture and secure with the previously
removed screws. Tighten with a
screw driver.
4
Install Mounting Bracket
Wall Anchor
(not included)
Flat Washer
Self-tapping Screw
Mounting
Bracket
Ceiling
Attach the mounting bracket onto
the desired ceiling surface. Secure
with the flat washers and self-tap
-
ping screws.
Note: Wall anchors are required
for certain installation conditions
(concrete or brick walls). Mark on
the desired ceiling surface for wall
anchors by using the holes on the
mounting bracket. Remove the
mounting bracket and drill proper
holes on the desired ceiling surface
and then insert the wall anchors.
