[email protected] • 813.978.3900
–7–
3
Remove Circuit Board
Remove the battery cover from
the luminaire by using a screw
-
driver and removing the screws.
Screw
Battery Cover
Luminaire
4
Remove Circuit Board
Screw
Press
Press
Battery Holder
Battery
Luminaire
Quick Connector
Disconnect the quick connector by pressing the tabs on the side. Remove
the old battery by removing the two screws. Replace the battery and
secure it with the previously removed screws. Then connect the tabs of
the quick connector back together.
Reinstall the solar panel to the fixture body and secure with previously
removed screws.