INSTALLATION & MAINTENANCE GUIDE
–4–
w w w. a m p l i g h t i n g . c o m
–4–
Wire Connections
2
Install Stake
1
[email protected] • 813.978.3900
–5–
INSTALLATION & MAINTENANCE GUIDE
Wire Connections
3
AMP
®
Silhouette Integrated LED Path Light
APL-3011-4-B-BZ
AMP
®
Silhouette Integrated LED Path Light
APL-3011-4-B-BZ
Board
Stake
Soil
Ground
Determine the desired location for mounting
the fixture. Hammer the stake into the
ground until flange of stake is flush to grade.
To avoid damage to the stake, place a board
on top of the stake while hammering.
NOTE: If the ground is hard and the stake
is difficult to install, make a crosscut in the
ground using a flat shovel.
Clear away an area in the ground at the
wireway slot on top of the stake. Lay the
luminaire pigtail into the wireway slot
and thread the fixture onto the stake.
Thread the lock nut at the bottom end
of the fixture against the stake and hand
tighten.
Pigtail
Wireway Slot
Lock Nut
Fixture
Strip both leads from the luminaire pigtail. Using two wire connectors (sold
seperately), connect the leads from the luminaire to the main supply cable
leads.
Pigtail
Main Supply Cable
Wire Connectors
