[email protected] • 813.978.3900
–5–
Install Wall Mount
4
Wire Connection
5
Place the wall mount at the desired
location and mark two points on the
wall surface for the wall anchors.
Remove the wall mount and drill the
proper holes on the wall.
Insert the wall anchors, into the drilled
holes. Pass the main low voltage supply
cable through the center hole on the
wall mount and attach it onto the wall.
Secure with the lock screws. Hand
tighten until snug.
Wall Anchor
Wall Mount
Main Low Voltage
Supply Cable
Lock Screw
Using two wire connectors (sold
separately) connect the supply
wires from the fixture to the main
low voltage supply cable leads.
Wire Connectors
Supply Wires from
Luminaire
Main Low
Voltage Supply
Cable
