[email protected] • 813.978.3900
Install Surface Mount to Fixture body
1
Install Fixture Body to Surface
2
Option 1: Surface Mount
Surface Mount
Wire Exit
Supply Cable
Fixture Body
Glare Guard
Pass the supply cable through
the center hole of the surface
mount. Then thread the surface
mount onto the fixture body.
Make sure the wire exit on the
surface mount and the glare
guard are facing the opposite
direction after installation.
Wire Exit
Self-tapping Screw
Supply Cable
Mark
Place the supply cable in the wire exit. Then attach the surface mount
with the fixture body to the mounting surface and secure with self-tap-
ping screws using a screwdriver to tighten.
NOTE: Wall anchors are required for brick walls or concrete walls. To
determine anchor locations, place the surface mount onto your de-
sired location and mark points using the hole on the surface mount as a
guide.
Go to the Step 3 - Step 4 for wiring connections and direction adjust-
ment.
Fixture Body
Mounting Surface
Surface Mount
Wall Anchor (optional)
