Ammann ASC 70, Operating Manual

Page: 73 / 184

69 ASC 70
396306
OPERATION MANUAL
! CAUTION !
Indicator lamp will light up and acoustic signal
will be heard with Rollers equipped with ROPS 2D
and driving across a slope with gradient over 12.
Vibration will cut off if Roller bank increases to 15°.
! CAUTION !
If Driver stands up from the seat while driving the
speed will slow down until Roller is fully stopped
and braked, this will last 4 seconds. Following next
4 sec. the engine shuts down.
To start the engine again the Driver must sit down
again, shift the travel actuator to neutral, turn ON
brake switch, turn ignition key to “0” position and
then start the engine. Driver must brake off before
starting to move.
If Driver sits down again before 4 sec. have elap-
sed, then the Roller will continue driving at a speed
selected.
If Driver sits down after 4 sec. have elapsed, then the
engine will shut down, the Driver may start moving
it again. Before that the Drives must shift the con-
troller to neutral, and select again the original dri-
ving direction.
If there is a loss of traction, a decrease of
tractive force or a significant decrease of
the engine speed, engage the lower gear
using the transport and working speed
change-over switch (4)! If the machine is
equipped with an ATC differential lock
function, enable this function using the
switch!