Ammann 5953002, Operating Manual

Page: 124 / 194

118 ARX 36-2 T4i, ARX 40-2 T4i , ARX 45-2 T4i
595023
3.6 Lubrication and maintenance operations
3.6.5 Cleaning the hydraulic oil cooler
Check the cooling fins that they are not dirty or clogged.
Clean the fins with water or blow through with compressed air.
When working in a very dusty environment, carry out the clean-
ing daily. The cooler clogging results in reduced cooling effect
and increased temperatures of the engine coolant and hydraulic
oil.
Never clean the cooler with high pressure (e.g. with
strong water jets).
When the cooler is contaminated by petroleum prod-
ucts, use a cleaning agent and proceed according to
the manufacturer’s instructions! Find out the cause of
contamination!
Do not smoke while working!
Check the hydraulic circuit for leakage.
Follow environmental standards and regulations when
cleaning the machine!
Clean the machine in a workplace equipped with a catch-
ing system of cleaning agents to avoid contamination of
the soil and water!
Do not use forbidden cleaning agents!