Step'4:'Assembly'of'bicycle'basket,'reflectors'and'cable'holders'
•
The(bicycle(basket(is(mounted(with(the(clamps(and(a(plier(and(this(is(mounted(on(the(bike((see(
picture(4A,(4B(and(4C)(
•
The(reflectors(for(the(wheels(are(mounted((see(picture(4D)(
•
The(cable(holders(are(mounted((see(picture(4E)(
(
•
Make(sure(that(all(moving(parts(on(the(rear(axle(is(5ghtened(–(check(the(umbraco(bolts(((((((((((((((((((((
(see(picture(4F)(
Picture'4A'
Picture'4B'
Picture'4C'
4(pcs.(10(mm(bolts(
(length(50(mm)(
4(pcs.(washers(
4(pcs.(nuts(
(10(mm)(
2(pcs.(brackets(for(
moun5ng(of(the(backet(
12(clamps(for((
assembly(of(basket(
Picture'4D'
Picture'4E'
Picture'4F'
ENJOY(YOUR(NEW(BIKE…!(
IMPORTANT:**
•
The*frame*number*is*stamped*into*the*frame*on*the*le;*side*of*the*bike*–*just*in*front*of*the*le;*
pedal.*
•
Remember*to*adjust*and*re@Aghten*all*moving*parts*on*the*bike*a;er*some*weeks*of*use.*If*re@
Aghtening*of*the*spokes*are*needed,*please*use*a*spoke*Aghtener.
(
Page(7(