User Manual for AML Oceanographic’s Micro SVT Sensor
42
LINE SETTINGS
CURRENT SETTINGS:
2400,N,8,1,COM1
1)
300,E,7,1
7)
300,N,8,1
2)
1200,E,7,1
8)
1200,N,8,1
3)
2400,E,7,1
9)
2400,N,8,1
4)
4800,E,7,1
10)
4800,N,8,1
5)
9600,E,7,1
11)
9600,N,8,1
6) 19200,E,7,1
12)
19200,N,8,1
Parity
Data Bits
Stop Bits
13) ODD
16) 7 bits
18) 1 bit
14) MARK
17) 8 bits
19) 2 bits
15) SPACE
20) COM1
21) COM2
22) COM3
23) COM4
24)
Save Changes
YOUR CHOICE:
Press ESC to return
Figure E-1
Communication parameters window in PROCOMM.
If all cables have been connected properly and the appropriate baud rate/serial port
combination chosen, the instrument will respond with a header and then the prompt
(
>
), eg:
Micro SVT Sensor V1.42 SN:7122-SVT
Copywrite 2003, AML Oceanographic
>
Once the prompt appears, the Micro SVT Sensor is ready to accept instructions. Refer to
the RS-232 Command Summary in section 5.1.2.
To leave PROCOMM, the
<ALT>X
key combination is used.
