User Manual for AML Oceanographic’s Micro SVT Sensor
16
5.1.3 Advanced Commands
5.1.3.1 Display commands
Command:
DIS SCAN [D SC]
This command will display the current scan options.
Example:
>dis scan
Scan delay is 100
Display time: yes
Display date: no
Command:
DIS STARTUP [D ST]
This command will display the current startup options.
Example:
>dis startup
Logging timeout is disabled
Startup delay is 0
Header is displayed
Start up in prompt mode
Characters reception is enabled
Command:
DIS MEMORY [D M]
This command will display the current memory status.
Example:
>dis m
Memory is not installed
Or if there is memory
>dis m
Memory is 005.00% used
NOTE: Use the VER command to display total memory available to the system.
5.1.3.2 Set commands
Command:
SET SN
nnnn
This command sets the serial number of the instrument. To display the instruments serial
number use the VER command.
Example:
>set sn 1234
To display the serial number,
>ver
