©Copyright AMKUS Rescue Systems, Inc. 2010 - 2019
LAS-002 August 19, 2019 Rev03
7
6.0 OPERATION
6.1 SPREADING / SQUEEZING / LIFTING
Figure 6.1a
The spreader can be used for spreading, squeezing, pulling and lifting operations. When spreading, squeezing or lifting, make sure
that the spreader tips are positioned to maintain maximum contact with the surfaces to be spread or gripped. Always stabilize the
object being lifted. When operating the spreader, the tool may rotate as it meets resistance. If tool rotation places the user or others
in jeopardy, immediately release the control valve and modify your procedure. The deadman safety feature should immediately return
the control valve to the center (neutral) position, and the movement of the arms will stop. Then seek another purchase point that does
not cause the same problem.
TIPS MAY SLIP
INCREASE GAP AND
REPOSITION TIPS
CORRECT
STARTING POSITION
INCORRECT
STARTING POSITION
Figure 6.1b
See 6.2B for exchanging spreader tips
