Main Active Speaker Wire Connection:
Connect the audio wires connecting active speakers to three passive speakers through conduit. Pre
terminate the wire and connect the Phoenix plug to the wire. Punch the knockouts on the sides of the
handy box. After the connection is made, make sure to close the handy box with the cover provided.
The audio wires should be a two conductor wire with recommended 18 AWG wire.
Connect the Ethernet signal wires through conduit, terminate with RJ45 connector, punch the one of
the knock out where RJ45 jack is located, than plug it into the speaker. After the connection is made,
make sure to close the handy box with the cover provided.
Companion Speaker connection.
Connect the audio wire from active speaker to the passive speakers. The passive speaker will be
broadcasting different program material. Make sure that the passive speaker is installed at the
different zone of the building as specified by your designer.
Punch the one of the knockout on the side of the handy box. After the connection is made, make
sure the close the handy box with the cover provided.
Connection to passive
speaker for different
channel at separate
zone.
The connection should be
made Cat5 or above cable for
the Ethernet connection.
A single 2 position
phoenix connection
inside of the
handybox.
A single 2 position
phoenix connection
inside of the
handybox.
