25
Auto Reconnect (Always-on):
The device will link with ISP until the connection is
established.
Manually:
The device will not make the link until someone clicks the
connect-button in the Status-page.
9.
Maximum Transmission Unit (MTU)
: Most ISP offers MTU value to users. The default
MTU value is 0 (auto).
F. L2TP
1.
Activate WWAN for Auto-Failover
: With this function enabled, when the Ethernet WAN
connection is broken, the device will automatically activate the WWAN connection and
keep you connected to internet with the alternative WWAN broadband service. Meanwhile,
if the device detected that the Ethernet WAN connection is recovered, your broadband
connection will be switched to use the Ethernet WAN service
2.
IP Mode
: Please check the IP mode your ISP assigned, and select “Static IP Address” or
“Dynamic IP Address”.
3.
My IP Address
and
My Subnet Mask
: The private IP address and subnet mask your ISP
assigned to you.
4.
Router IP
and
Server IP Address/Name
: The IP address of the L2TP server and
designated Router provided by your ISP.
5.
L2TP Account
and
Password
: The account and password your ISP assigned to you. If
you don't want to change the password, keep it blank.
6.
Connection ID
: Optional. Input the connection ID if your ISP requires it.