51
3.3.3.4 MAC control
MAC Address Control allows you to assign different access right for different users and to
assign a specific IP address to a certain MAC address.
MAC Address Control
Check “Enable” to enable the “MAC Address Control”. All of
the settings in this page will take effect only when “Enable” is
checked.
Connection control
Check "Connection control" to enable the controlling of which wired
and wireless clients can connect to this device. If a client is denied
to connect to this device, it means the client can't access to the
Internet either. Choose "allow" or "deny" to allow or deny the clients,
whose MAC addresses are not in the "Control table" (please see
below), to connect to this device.
Association control
Check "Association control" to enable the
controlling of which wireless client can
associate to the wireless LAN. If a client is
denied to associate to the wireless LAN, it
means the client can't send or receive any data
via this device. Choose "allow" or "deny" to
allow or deny the clients, whose MAC
addresses are not in the "Control table", to
associate to the wireless LAN.
Summary of Contents for CDE530AM-002
