If any of these buttons do not operate the TV set, then a
KEY FIX
operation can
be performed (see below).
If you change your TV set to a different brand and the remote control requires
re-programming, repeat this brand search procedure with your new TV set.
If the remote control cannot find the TV brand, the TV standby button will flash
rapidly and the remote control will revert to normal operation. No TV brand
code will be stored.
The remote control can be programmed to operate certain functions of your
TV set. To do this, follow the instructions below.
In case of a mistake, the process can be exited at any point by pressing and
holding the TEXT/SHIFT button and at the same time pressing the STOP
button. The remote control will revert to normal operation and no TV brand
code will be stored.
1. Note the brand of your TV set.
2. Find the 4-digit brand code for your TV set by referring to the brand code
tables on the Amino support site (www.aminocom.com/support). Make a note
of the brand code.
3. Make sure your TV set is turned on. (The STB does not need to be turned on
to perform this programming feature).
4.
On t
he remote control,
press and hold the
1
and
3
buttons simultaneously
for
approximately 3 seconds until the TV standby button remains lit, then release
both buttons.
5. Enter the 4 digit brand code for your TV set. On each digit entry the TV
standby button will flash. When you enter the 4th digit the TV standby button
will flash then remain lit.
6. Point the remote control at your TV set then press and hold down the
TV
standby
button or the
Mute
button on the remote control.
7. The TV set will either turn off or display the MUTE symbol on screen (this may
take a few minutes). When this happens, release either the TV standby or the
Mute button.
8. Press and hold the
TEXT/SHIFT
button and at the same time press the
STOP
button to finish setting up the TV control mode. The TV standby button will go
out. The TV control function is now programmed into the remote control.
The following buttons will now operate the TV set:
TV standby, AV source
select, Volume Up, Volume Down, Mute
.
When a TV brand has been programmed into the remote control using either
of the previous methods, the following additional buttons can also control the
TV set. These can be accessed by pressing and holding the
TEXT/SHIFT
button
and at the same time pressing:
Digit buttons 0 - 9, Left, Right, Up, Down, OK, Channel Up, Channel Down,
the 4 colour keys
Note: operation of these buttons is not guaranteed to control the functions of
your TV set.
If the TV brand cannot be found by the previous
Brand Search
method then
Auto Search
can be used.
Note: this process may take several minutes to find your TV code.
Make sure your TV set is turned on. The STB does not need to be turned on to
perform this programming feature.
1. On the remote control, press and hold the
1
and
3
buttons simultaneously for
approximately 3 seconds until the TV standby button remains lit, then release
both buttons.
2. Point the remote control at your TV set then press and hold down the
TV
standby
button or the
Mute
button.
3. When the TV either turns off or brings up the MUTE symbol on screen, release
either the TV standby button or the Mute button. This may take a few minutes
to happen.
4. Press and hold the
TEXT/SHIFT
button and at the same time press the
STOP
button to finish setting up the TV control mode. The TV standby button will go
out. The TV control function is now programmed into the remote control.
If the remote control cannot find the TV brand, the TV standby button will flash
rapidly and the remote control will revert to normal operation. No TV brand
code will be stored.
If
Auto Search
cannot set up operation of the TV set, then the remote is unable
to control that TV set.
If not all the buttons listed under TV shift functionality operate the TV set, then
a
KEY FIX
operation can be performed as follows:
1. Press and hold the
1
and
9
buttons simultaneously for approximately 3 seconds
until the
TV standby
button is lit.
2. Try all the above mentioned TV buttons.
3. If the TV does not respond to a button, then hold that button down
permanently. The remote control will now step through alternative settings.
When the TV responds correctly, release the button.
4. Repeat the procedure for other buttons if necessary.
5. When you have finished, press
TEXT/SHIFT
and
STOP
simultaneously.
To reset the remote control and erase the TV functionality:
1. Press and hold the
1
and
6
buttons simultaneously for approximately 3 seconds
until the
TV standby
button is lit.
2. Enter the key sequence
9 9 6
. The TV settings will be deleted from the remote
control.
4. TV control setup: Brand Search
99-709852-03 Rev.02-02 AM-010408-DS v3
5. TV control setup: Auto Search
6. TV shift functionality
7. Key fix
8. Removing TV functionality
