Amika Immortal Power-life, Manual

Page: 5 / 23

en
Maintenance Instructions
Cleaning
Your Power Cloud
Smooth Dryer is virtually
maintenance-free. No
lubrication is needed. For
proper operating performance,
the dryer must be kept clean.
When cleaning is needed,
unplug the cord, and clean
dust and lint from air intake
openings with a small brush
or the brush attachment of
a vacuum cleaner. The outer
surface of the dryer should be
wiped clean with a cloth only.
Blocked or clogged air intake
vents will cause the dryer to
overheat. If overheating occurs,
an automatic safety device will
shut the dryer or the heat off
to prevent damage or personal
injury. If the unit or the heat
cycles off, unplug the cord and
allow the dryer to cool for 10
to 15 minutes before restarting.
Make sure the air vents are
clean. Concentrators and
Diffusers should be cleaned
with a damp cloth.
CAUTION: never allow the
power supply cord to be
pulled, twisted, or severely
bent. Never wrap the cord
tightly around the dryer.
Damage will occur at the high
flex point of entry into the
dryer, causing it to rupture
and short. Inspect the cord
frequently for damage. Stop
use immediately if damage is
visible or unit stops or operates
intermittently. If the cord or
dryer is damaged or does not
operate properly, return it for
repair to an authorized service
representative only. No repairs
should be attempted by the
consumer.
Storage
When not in use, your dryer
should be disconnected and
stored in a safe, dry location,
out of reach of children. Do not
wrap line cord around dryer.
Allow the cord to hang or lie
loose and straight at the point
of entry into the dryer.