14
MENU (P 4/5):
Record Interval
The dash camera is set to record in segments of 3 or 5 minutes. These videos will record to the full limit of the memory card. Upon writing the full memory available, the new videos
will overwrite the old data in order to achieve non-interrupted recording.
MENU Button
【
Record Interval
】【
3 minutes
】
/
【
5 minutes
】
Motion Detection
If set to Off, the camera will record regardless of movement (auto-record). When set to On, the camera will automatically record only when it senses movement in a specific depth of
field. This setting is intended for Parking only and should not be used while driving.
MENU Button
【
Motion Detection
】【
Off
】
/
【
On
】
Collision Detection (G-Sensor)
This dash camera is equipped with a G-Sensor (Gravity Sensor) to determine the direction, bearing and any forces exerted upon the vehicle. In the case of a collision (or EVENT),
the recorded data and video will be protected and not overwritten by looped recording. This video will show up in the EVENT folder (up to 50 files). Adjust the sensitivity parameters
of x, y and z axis’ with this setting. If set to High, the least sensitivity will record video to EVENT; if set to Low, more force will be needed to record video to EVENT. Choosing Off
will not record any information to the EVENT folder; all video will be overwritten in looped recording. EVENTs are 30 seconds long: 10 seconds before the incident and 20 seconds
after.
MENU Button
【
G-Sensor
】
/
【
Off
】
/
【
High
】
/
【
Normal
】
/
【
Low
】
Frequency (Anti-Flicker)
Selecting Light Frequency will optimize the camera for 60Hz or 50Hz lighting to avoid video flicker. Generally 60Hz is set for NTSC regions (North America, Japan) and 50Hz is set
for PAL regions (UK, Africa, Australia, most of Asia and Russia). AUTO will try to determine frequency.
MENU Button
【
Light Freq
】【
Auto
】
/
【
60Hz
】
/
【
50Hz
】
Language Setting
Use this setting to adjust the menu to your preferred language.
MENU Button
【
Language Setting
】【
English
】
/
【
Simplified Chinese
】
/
【
Traditional Chinese
】
/
【
Korean
】
/
【
Japanese
】
/
【
Russian
】
/
【
German
】
/
【
French
】
/
【
Italian
】
/
【
Spanish
】
/
【
Portuguese
】
/
【
Turkish
】
/
【
Polish
】
/
【
Hebrew
】
/
【
Vietnamese
】
MENU (P 5/5):
File Deletion
Select Video to locate videos in the “NORMAL” (looping) folder; select Emergency to review files in the “EVENT” (protected) folder; selection can be made with the UP or DOWN buttons.
Press OK to select the folder then UP or DOWN to highlight a video. Press the OK button then “Delete One” to delete the highlighted file, pressing OK again to confirm the selection. Selecting
“Delete All” will delete all files in the folder. Press the Back button during any selection to return to the previous and Cancel the action.
MENU Button
【
File Deletion
】【
Video
】
/
【
Emergency
】
Confirm the process by pressing UP or DOWN once and OK.
Format
This function will delete all data (video and images) on the memory card INCLUDING protected (EVENT) data. When the memory card is used for a long time, too much data will reduce the
access efficiency. This function will optimize the access speed of the memory card. Formatting should be done regularly; be sure to backup any videos or images you wish to keep.
MENU Button
【
Format
】【
Yes
】
/
【
No
】
Confirm the process by pressing UP or DOWN once and OK.
Default
This function will reset all settings on the dash camera to default factory settings.
MENU Button
【
Default Setting
】【
Yes
】
/
【
No
】
Confirm the process by pressing UP or DOWN once and OK.
About
View the firmware version of the device.
MENU Button
【
About
】
