Description
The S-Video for Amiga 600 / 1200 is a mod that replaces original on-board modulator with S-Video
connector vastly improving picture quality.
This is fully assembled version for internal installation.
Basic soldering skills are required to connect this device.
Board requires four signals described on PCB as:
GND – Ground
VCC – +5 Volts
YIN – Luminance – Leg 16 of Sony CXA1145
CIN – Chrominance – Leg 15 of Sony CXA1145
Board layout has been redesigned and is now full SMT.
Installation
In order to connect S-video internally, You will first need to desolder original RF Modulator.
Four wires should be soldered to S-Video PCB on the one end →
+5V, GND, CIN, YIN
and on the other end directly to Amiga PCB.
Start off with soldering GND and +5V wires to S-Video PCB
