15
l
Before cleaning the filter, remove the
power cord plug from the wall outlet.
l
The filter shall be cleaned when there
are visible stains on it, wash the filter
in warm water with no detergent. Use it
only when completely dry.
l
Always use the vacuum cleaner with a
filter in place.
l
Failure to install the filter may result in
motor damage.
1.
Remove the dust bag.
2.
Remove the filter by sliding it up from the guides
(Fig. 3, ittem 10).
3.
Clean the filter or replace (Fig. 3, ittem 11).
4.
Replace the filter again placing it in the guides.
Make sure that the filter before the foundation
was completely dry.
Cleaning and replacing the inlet filter
Rinse the filter with lukewarm water and let dry
completely
l
Before cleaning the filter, remove the
power cord plug from the wall outlet.
l
Clean the filter when it is clearly soiled.
Shake dirt off the filter and then brush it
with a soft bristle brush. Do not wash the
filter in water. In case of heavy soiling or
lasting damage, replace the filter with a
new one.
l
Depending on the intensity of use, it is
recommended that you clean the filter
once a month and replace it with a new
one every six months.
l
Always use the vacuum cleaner with a
filter in place.
l
It is recommended that you only use
original Amica filters for your vacuum
cleaner.
1. Open the air exhaust cover (Fig. 3, ittem 12).
2. Remove the filter, clean or replace it with a clean
one (Fig. 3, ittem 13).
3. Close the air exhaust cover.
Cleaning and replacing the outlet filter HEPA13
Filters cleaning.
WARRANTY AND AFTER SALES SERVICE
Warranty
Warranty service as stated on the warranty card.
The manufacturer shall not be held liable for any damage caused by improper use of the product.
