14
DESCRIPTION OF THE APPLIANCE
Appliance components (Fig. 1, item ...)
1. Wheels
2. Power cord
3. Power button
4. Air exhaust
5. Power smooth control slider
6. Cord retractor button
7. Dust bag full indicator
8. Cover
9. Cover lock
10.Hose socket
OPERATION (Fig. 3)
Attachments (Fig. 2. item...)
(1) Allpurpose suction brush
1
(2) Turbobrush *
1
(3) Suction head for upholstery
1
(4) Suction head for narrow spaces
(2 in 1)
1
(4) Bookdusting brush (2 in 1)
1
(5) Telescopic tube
1
(6) Dust paper bag included
1
(7) Hose
1
(8) Parquet suction brush *
1
Preparing for vacuuming
Always unplug the appliance before attach
ing or removing attachments!
l
Attaching flexible hose: insert the hose end into
the inlet port. Push until the end falls into place
with an audible click (Fig. 3, item 1).
l
Removing the hose: press buttons on the hose
end, unlatch and remove the hose from the inlet
port (Fig. 3, item 2)
l
Connect the telescopic tube with the hose (Fig.
3, item 3) and the proper attachment (Fig. 3, item
5), slide open the telescopic tube to a suitable
length.
l
Grab the plug and pull the power cord while
holding the appliance body, plug into a power
outlet.
l
Before you start vacuuming, extend power cord
cable to sufficient length and insert the plug into
the wall socket. The yellow mark on the power
cord indicates it is extended almost all the way.
When you see the red mark do not pull the power
cord any further.
l
Switch on the appliance with the on / off button.
(Fig. 3, item. 6).
l
Set the desired appliance power with the power
control knob. (Fig. 3, item. 8).
l
After finishing using the appliance, press the on/
off button to turn off the vacuum cleaner (Fig. 3,
item 6).
l
Unplug the cord from the wall outlet.
l
Retract the power cord by pressing cord re
tractor button (Fig. 3, item 7). For this opera
tion hold the cord to prevent it from tangling or
bumping the plug on the vacuum cleaner hous
ing.
l
Disconnect the suction cleaning head from
the tube and disconnect the telescopic tube
from the hose. (Fig. 3, item. 3, 5).
l
Close the telescopic tube
(Fig. 3, item. 4).
The vacuum cleaner may be stored in a vertical or
horizontal position. The hose can remain attached
to the vacuum cleaner, but please be careful not to
bend it too much during storage.
* applies to the model VM 2062 (Fen Turbo)
Replacing the dust bag
Before replacing the dust bag, remove the
power cord plug from the wall outlet. Al
ways use the vacuum cleaner with a fitted
dust bag. If you forget to insert a dust bag
or it is fitted incorrectly, the cover cannot
be closed completely fix the position of a
dust bag and close the cover
If the dust bag full indicator (Fig. 1, ittem
7) goes on, check whether the suction
brush or the cleaning head, hose or tube
is not blocked with large items stopping
the air flow. After removing the items, if
present, restart the vacuum cleaner - if
the dust bag full indicator is still red,
replace the dust bag with a new one.
CLEANING AND MAINTENANCE
1.
After disconnecting flexible hose, open the front cover by lifting it upwards.
2.
Release the dust bag lock and remove the paper bag from the guides, if filled with dust (Fig. 3, ittem
9).
3. Insert a new dust bag by sliding it into the guides.
4.
Close the cover by pressing it down until it clicks.
