HOW TO INSTALL
Place the J-BOX through the cut-out hole and mount
according to your local electrical code compliance.
Rotate and hold both spring clips upward to allow
passage through the cut-out in the ceiling.
Continue to press the light module through the cut-out
hole until it is securely fixed and flushed with the ceiling.
8-9
8
9
06
Spring replacement installation
If a spring is found to be damaged, remove the spare spring from the fitting bag and
replace it as follows:
1
2
3
4
5
Place the parts circled
in red as shown in the
picture.
Press the tilted side of
Step 3 inward to the
position of the red circle
in Step 4.
Put the buckle back
into the spring ring.
Pull out the buckle circled in red in Step 1 and place it
in the position shown in Step 2.