www.amico.com
19
Cleaning
To Dry
Thoroughly wipe with a dry sponge or soft cloth.
To Disinfect
• Wash the surface with one of the approved cleaners or refer to the Bleach cleaning instructions if bleach needs
to be used.
• Wipe off residue with water using a soft cloth or sponge.
• Thoroughly dry.
Before Cleaning
• Disconnect or unplug the power cord from the mains supply (If electric).
• Set the bed brake on by pressing on the brake pedals to the brake position.
During Cleaning
• Do not use abrasive cleaning products.
• Do not use oil based products.
• Do not use a steam cleaner, washing tunnel, high-pressure spray, or hose.
Warranty
www.amico.com
www.amico.com
Amico Beds Corporation warrants its Patient Equipment to be free from defects in material and workmanship for a period of
twelve (12) months from the date of shipment. Within this period Amico Beds Corporation will provide the parts for repair or
replacement of defective parts at Amico Beds Corporation cost.
Furthermore, Amico Beds Corporation will warrant its material to be free from defect for an additional period of two (2) years
(three (3) years from the date of shipment). Within this period, Amico Beds Corporation will replace any part which is proven to be
defective, at no charge. Shipping and Installation costs after the first twelve (12) months will be borne by the Customer.
This warranty is valid only when the product has been properly installed according to Amico Beds Corporation specifications,
used in a normal manner and serviced according to factory recommendations. It does not cover failures due to damage which
occurs in shipments or failures which result from accidents, misuse, abuse, neglect, mishandling, alteration, misapplication or
damage that may be attributable to acts of God.
Amico Beds Corporation shall not be liable for incidental or consequential damages resulting from the use of the equipment.
All claims for warranty must first be approved by Amico Beds Corporation Service Department: [email protected] or
1-877-462-6426. A valid Return Goods Authorization (RGA) number must be obtained from Amico Beds Corporation prior to
commencement of any service work. Warranty work, which has not been pre-authorized by Amico Beds Corporation, will not be
reimbursed.
Amico Beds Corporation | 85 Fulton Way, Richmond Hill, ON L4B 2N4, Canada
600 Prime Place, Hauppauge, NY 11788, USA
Tel: 905.764.0800 | Fax: 905.764.0862
Warranty Policy - Beds and Stretchers
AB-WARRANTY 11.26.2019
