14
If the engine keep on running even after the speed lever is placed at the
"STOP'position, either turn the fuel cock to the "CLOSE"position or loosen
the nut of high pressure fuel pipe on the pump side to stop the engine.
Do not stop the engine with the decompression lever.
Do not stop the generating set with load. Stop it after the load removed.
7.STOP THE GENERATING SET
1. Disconnect the load from the generating set.
2. Turn off the breaker of the generating set.
3. Set the speed lever at "RUN" position, run
the generating set without load for about 3
minutes. Do not stop the engine suddenly,
otherwise the temperature will increase
abnormally, the nozzle will blocked and the
generating set will be damaged
Press down the stop lever
Concerning the electric starter, turn the key
to "OFF ",
Turn the fuel cock lever to"S"position
!
WARNING
8. PERIODIC CHECK AND SERVICE
Periodic check and service are very important for keeping the engine in good condi-
tion and durable. The chart below indicates what checks to make and when to make
them.
With engine speed lever
at STOP position
stop lever
Summary of Contents for AH6000LN
