10
Amico Beds Corporation
• Do not immerse the product in water
• Do not attempt to clean or degrease the steel shafts of the actuators
• Use only approved cleaning products. If bleach is being applied to the product, strictly adhere to the BLEACH
CLEANING instructions
• For electrical equipment, please do not unplug the handset or actuators from the control box for cleaning
• Do not use a water temperature of more than 50°C or F
MATTRESS CLEANING INSTRUCTIONS
To wash:
Wipe with a sponge or soft cloth wetted with warm water containing soap or mild detergent
To rinse:
After washing, rinse cover with warm water to remove residue
To dry:
Thoroughly wipe with a dry sponge or soft cloth
To disinfect:
• Wash the surface with one of the approved cleaners or refer to the Bleach cleaning instructions if bleach needs
to be used
• Wipe off residue with water using a soft cloth or sponge
• Thoroughly dry
Before Cleaning
Disconnect or unplug the power cord from the mains supply (If Electric)
Set the bed on brake by pressing on the brake pedals to the Brake position
During Cleaning
• Do not use abrasive cleaning products
• Do not use oil based products
• Do not use a steam cleaner, washing tunnel, high-pressure spray or hose
Cleaning
