![background image](http://html.mh-extra.com/html/amica/wtp-477-030/wtp-477-030_operating-instructions-manual_2932444026.webp)
26
Use this function to adjust clothes drying intensity.
You can only activate Drying Level function before the programme starts.
Press the [Drying Level] to select the drying time.
The Drying Level function can be used only in [Cotton] [Mix] [Jeans] and [Synthetics]
programmes.
The appliance offers 3 drying levels: Cupboard Dry
, Hanger Dry
, and Iron Dry
(laundry will be still damp)
When you select “Iron Dry” and the dryer door is not opened after the programme
has finished, the 1 hour anti-crease phase will be extended to 2 hours. When you
select the “Iron Dry” option you will hear a beep. You can press the same button
again to deactivate the option. If you open the door or press Start / Pause during the
Anti-crease phase, it will be cancelled.
Delicates
Use this programme to dry delicate laundry as shirts, blouses and silk garments at low
temperature so that they are ready to wear.
Mute beeping
The dryer beeps when you turn the programme selection knob, press buttons and when
a programme ends. Press and hold the “Iron Dry” button for 3 seconds to mute the
beeping. When you press the button, a beep sounds to indicate that the option has been
disabled.
Specific Duration Drying
Set the knob to the Specific Duration Drying position and press the options buttons to
select options, then press Start / Pause to start the programme. Press and hold the
Specific Duration Drying button to cycle through the available delay times.
Child Lock
When the Child Lock option is activated you cannot change the running programme by
pressing buttons. To activate the Child Lock, press and hold the “Delicates” and “Anti-
Crease” buttons simultaneously for 3 seconds. When the Child Lock is active, all keys
are inactive. The Child Lock is automatically deactivated when the drying programme
has completed. When you activate / deactivate the Child Lock, the “CL” symbol is shown
on the display for 2 seconds and then goes out and you will hear a beep. Note: when
the appliance operates or the Child Lock is active, each time you turn the programme
selector knob, you will hear a beep and the “CL” symbol will appear on the display for
2 seconds, and then go out. Even if you set the programme selector knob to another
programme, the previously selected programme will continue. To select a new
programme, deactivate the Child Lock and then set the programme selector to the “OFF”
position. Then you can select and start a new desired programme.