15
DISPLAY AND CONTROL PANEL
8.
Delay button
You can delay the drying cycle for up to 24 hours. Press the button multiple times to se-
lect delay from 1 to -24 hours. The drying will start in x:xx hours.
When the delay start function is active the display will only show the delay start time and
the [DELAY] indicator will flash. After 30s, the display will only show “-”.
Procedure detail:
1). Load your laundry and make sure the appliance door is closed.
2). Press the [On/Off] button, then turn the programme selector knob and select
a desired programme.
3). You can select the [Anti-Crease] or [Gentle] options as needed
4). Press the [Delay] button.
5). Press [Delay] repeatedly to select the delay time.
6). Press [Start/Pause] to start countdown.
The drying cycle will start when the delay time has elapsed.
7). Press [Start/Pause] again to pause, the delay function.
8). Press [On/Off] to cancel the “Delay” function.
9
.
Time button
Press the “Time” button to adjust the drying time from 20 to 60 minutes. This function is
ideal for few small clothes, for example, one facecloth or two pairs of socks.
It is equivalent to using timer to control the drying process, but for “Warm” programme
only.
5 + 6.
Child Lock
This function locks function buttons to prevent settings being changed or operation
interrupted by children. Pres and hold
Gentle
and
Anti-Crease
button for 3 seconds to
activate the Child Lock during a drying cycle. When child lock function is set, the display
will show [
] icon and only [On/Off] button can be used. To disable Child Lock,
press and hold Signal and Anti-Crease buttons for 3 seconds.
Important!
If the Child Lock function is activated, the display will show the [
] symbol.
Important!
When you turn off or unplug the dryer or the drying cycle ends,
the Child Lock function will deactivate.
Moisture sensor
An appliance with a moisture sensor determines the laundry moisture and automatically
adjusts the drying time depending on the load. This function will automatically activate
during the drying cycle except in “Warm” “Cool” and “Refresh” programme.
