![background image](http://html.mh-extra.com/html/amica/vm-aqua-xpro/vm-aqua-xpro_operating-instructions-manual_2932833029.webp)
29
FEATURES AND COMPONENTS / OPERATION
Charge the battery:
1. The vacuum cleaner is delivered with a discharged battery.
Please fully charge the battery before using the vacuum cleaner.
2. Do not charge the vacuum cleaner at an ambient temperature lower than 5°C and higher than 40°C.
3. If the low power indicator appears on the LCD screen when you turn on the vacuum cleaner, please
recharge the battery.
Operate the appliance:
1. Place the vacuum cleaner securely on the storage stand.
2. Connect one end of the power cord to a wall outlet and the other end to the charging port of the
vacuum cleaner battery.
3. Charging time: 4-6 hours; discharge time: 10min / 20min / 60min.
Use the vacuum cleaner:
1. To prevent blockage of the air inlet, collect large pieces of debris (such as large papers and packag-
ing film) in the area to be cleaned.
2. Do not store or charge the battery at ambient temperatures below 5°C or above 40°C.
3. Before disposing of the product, remove the battery from the vacuum cleaner.
4. Do not modify the vacuum cleaner, accessories, power supply or battery.
Operate the appliance:
1. Press the Power button once to start cleaning.
2. Press the Power button again to finish cleaning.
3. When turned on, the vacuum cleaner will operate in Auto mode. To change the cleaning mode, press
the speed button and the vacuum cleaner will go into High Speed mode. Press the speed button again
to switch to the Mid Speed mode. Press the button a third time, the vacuum cleaner switches to Low
Speed mode. Press the button a fourth time, the vacuum cleaner returns to Auto mode.
NOTE:
Auto mode (only with the electric brush) - automatically adjusts the cleaning power to the type
of surface and the detected dust, using the dust sensor located in the electric brush. When dust is de-
tected, the display animation will turn purple-blue. If dust is not detected, the screen will return to blue.
4. The battery level will be displayed on the outer ring of the display in 6 sections. During operation, as
the vacuum cleaner battery discharges successive sections will turn off. If the battery is discharged, the
“Low power” message will be displayed on the screen - connect the vacuum cleaner to the charger.