![background image](http://html.mh-extra.com/html/amica/supf-822-w/supf-822-w_operating-instructions-manual_2932440026.webp)
26
Clean the heat exchanger filter
Open the cover.
Open three locking levers and pull the filter
handle.
Remove the clean the heat exchanger filter.
If there is a lot of lint on the filter wash the filter
under running water. Thoroughly dry the filter
before replacing it.
Clean the rubber seals on the filter and bracket.
Replace the filter.
Lock the three locking levers in the correct
position.
Close the cover until it clicks in place.
Fluff and lint collected on the filter and heat exchanger block the air flow and thus extend
the drying time and increase the energy consumption;
Remove the plug from wall outlet before cleaning!
Do not operate the dryer without the filter!
Clean the filter after each use to prevent the accumulation of fluff, threads, fibres inside
the drum.
Do not touch the heat exchanger as this may cause risk of injury and damage to the heat
exchanger.
About every two months or when necessary, use a vacuum cleaner to remove fluff, threads
and fibres from the heat exchanger. Clean the heat exchanger without exerting pressure
on its surface. Otherwise you can damage the heat exchanger.