51
OPERATION
Control Panel
● Immediately after the appliance is connected to electrical mains, all displays will light up
briefly. Your induction hob is then ready for use.
● The induction hob is equipped with electronic touch control sensor fields,
which are
operated by touching with a finger for at least 1 second.
● Touching of a sensor field is accompanied by an acoustic signal to acknowledge.
No objects should be placed on the sensor fields (this could cause an error). Touch sen
-
sor fields should be always kept clean.
Switch on the cooking zone
Once the appliance is switched on using the on/off touch sensor (
1
), select a cooking zone
(1) within the next 15 seconds.
1. When a cooking zone selection sensor field (
8
) is touched, "
0
" on the corresponding heat
setting indicator display will become bright.
2. To select the desired heat setting, slide your finger across the setting selection sensor field
(
2
).
Switch on the appliance
To switch on the appliance touch and hold the on/off sensor field (
1
) for at least 1 second.
The appliance is on, when LEDs around sensor (
4
) will light up, and "0" flashes on all cook
-
ing zone displays (3).
If none of the sensor fields is touched within 15 seconds, the appliance switches
itself off.
Heat setting selection sensor (
2
) is a slider type touch control sensor allowing selection of
heat setting (1-9 and P) by touching and sliding your finger across the marked area (
2
):
- sliding right - increase the heat setting
- sliding left - reduce the heat setting.
It is also possible to select the heat setting directly by touching the appropriate part of the
heat setting selection sensor field (
2
).