30
OPERATION
The Stop’n go function can be activated for a maximum of 10 minutes. If the
Stop’n go function is not deactivated within this time, the appliance or will
switch itself off.
If the appliance was accidentally switched
off using the on/off sensor (1), the Stop’n go
function makes it possible to quickly restore
the settings. To restore the settings after the
appliance has been switched off using the
on/off sensor (1), touch the on/off sensor (1)
again within 6 seconds. „0” will be shown on
all cooking zone displays (3) and the LED
pilot light will start flashing above the Stop’n
go function sensor field (7). Then, during the
next 6 seconds, touch the Stop’n go function
sensor field (7). Cooking zone displays (3)
will show the heat setting that was previously
set before the appliance was accidentally
switched off.
3
3
1
7
