![background image](http://html.mh-extra.com/html/amica/pb-4v-0-series/pb-4v-0-series_instruction-manual_2932363029.webp)
29
INSTALLATION
Installing the hob in worktop opening PBP4**
• Use four “A” brackets for 38 mm thick worktops. Fit the hob into worktop opening as shown
on figure 2 and 3. To properly secure hob in 28 mm thick worktop, use four 15x15x50 mm
wooden blocks in addition to “A” brackets. Fit the hob into worktop opening as shown on
figure 4 and 5.
• Check if adhesive seal is properly applied to the hob‘s flange.
• Loosely attach fixing brackets to the bottom of the hob
• Remove dust from the worktop, insert hob into the opening and press in firmly,
• Position fixing brackets perpendicularly to the hob‘s edge and tighten firmly.
1. worktop
2. screw
3. fixing bracket
4. hob
5. seal
2
3
5
4
1. worktop
2. screw
3. fixing bracket
4. hob
5. seal
6. wooden block
5
4
3
2
1
5
4
3
2
1
15
15
6
320
560
490
min 60
min 50
466
560
416
50
490
min 60
min 50
270
50