-
7
-
Important hints
The manufacturer shall not be held liable for any damages incurred in consequence of
improper usage of the appliance or its usage for purposes other that those specified
in the Operating Manual.
The ceramic plate purchased by you has been manufactured with the effective stand-
ards. When using the plate for industrial purposes, observe regulations effective for
the industry.
•
Check that the plate has not incurred damage during transportation.
•
The ceramic plate can be installed only by a qualified fitter – electrician, to ensure
the observance of VDE regulations and the “Technical connection conditions“.
•
In case of a failure, improper installation of the plate may result in loss of the
warranty rights.
•
The plate can be used only after it has been fitted into furniture, as only then you
will be protected against accidental contact with live components.
•
Make sure that electric conductors of other devices do not touch the heated hot-
plates.
•
Pay special attention when using power sockets located near the plate.
•
Never leave the plate unattended when cooking.
•
When in operation and some time after being switched off, the hotplates are still
hot.
•
Please note that children will not be able to notice danger when you cook. Inform
your children about the hazards or do not allow them to come near the plate when
in operation. Do not let the children touch the plate when in operation. WARNING!
Children may also get burnt by knocking the hot pots down.
•
Should there be a power failure, all the settings and indications will be cancelled.
WARNING! Be careful when power is restored, as hotplates which have been hot
before the power failure will no longer be controlled by their indicators.
•
When switched on, the hotplates quickly become hot. To avoid unnecessary power
consumption, switch them on after placing a cooking pot on them.
•
Do not lay plastic objects (spoons, bowls etc.) on a heated hotplate as they will
melt.
•
Do not cook empty enamelware.
•
Do not use plastic pots or containers made from aluminium foil, as they melt in
high temperatures and may damage the ceramic plate.
•
Only pots with clean and dry bottoms can be put on your plate.
•
Be careful not to scratch the plate with jewellery or sharp-edged pots, so only
use flat-bottom pots and saucepans on your ceramic plate, without sharp edges
or burrs.
•
Please observe the maintenance and cleaning instructions. Should you fail to
proceed in compliance with the provided guidelines, we will not be held liable
under the warranty conditions.
Summary of Contents for P*4VQ2 Series
Page 1: ...P 4VQ2 PB 4VQ2 Ceramic plate with touch con trol Operating Manual ...
Page 19: ... 19 ...
Page 20: ... 05 2007 1 IOAA 138 ...