Amica OKP6552SB, Operating Instructions Manual

Page: 12 / 56

- 12 -
In order to set the appropriate ozonation programme:
• Touch to activate the appliance and will be shown on the dis -
play.
• Touch and hold the sensor for 8 seconds, and the display will
show the number 1, 2 or 3, which will reflect the currently set pro -
gramme.
• Now use the and sensors to select the desired ozonation pro -
gramme suitable for the room size:
Display indication The surface area of the room where the ozone
generator function is used [m²]
< 6m²
6-10m²
> 10m²
• Touch again to confirm your choice and will be shown on the
display.
The selected ozonation programme is stored and will not be lost even
in the event of a power outage.
When the suitable ozonation programme is set you can start using the
ozone generator function. To do this, turn on the kitchen hood and set
any fan speed. Touch to activate the ozone generator function. You
can smell ozone in the air much like just after the storm. Touch the
sensor again to turn off the ozone generator function.
This function deactivates automatically after 3 hours or when you turn
off the fan.
Note: If the ozone generator operation is turned off for more than 40
minutes, and you re-activate the ozone generator, the cycle will be re -
started rather than resumed (the time the function operated before will
not be taken into account).
Excessive concentration of ozone in the air is harmful to health, there
-
fore use the suitable programme, and also, please observe these guide -
lines:
• Do not inhale the ozone directly from ozone generator housing out -
lets.
• Do not obstruct or block the air outlet grilles,
• Ozone generator function must not be used by persons suffering
from olfactory disorders.