21
OPERATION
Deactivate cooking zones
Deactivate cooking zone by doing one of the following:
•
Turn off the hob with the
sensor.
• Touch and hold the sensor for 3 seconds
• Touch
to activate the cooking zone and slide to the left to reduce the heat
setting "0."
Turn off the appliance
The appliance operates when at least one cooking zone is on.
•
Turn off the hob with the
sensor.
If a cooking zone is still hot, the relevant display will show the letter "H” or “h”
to indicate residual heat. For description of the symbol, see below.
Booster function "P"
Booster function increases the power of the Ø 180 - from 1500W to 2500W
Ø 210-220 - from 2000W to 3000W
Ø 160-180 - from 1200W to 1400W
Bridge from 3000W to 5000W.Place the cookware on the desired cooking zone.
• The cookware will be automatically detected and the relevant display will
show flashing "0."
• Touch to activate the Booster function — the display will show the letter “P”.
Turn off the Booster function:
• Touch the
sensor and slide your finger to “0” to turn off the Booster func
-
tion.
Booster function can be activated for up to 10 minutes. After that time, the
cooking zone heat setting is set to the nominal power (for example, if the heat
setting range is 0-9, the nominal power is 9, if the range is 0-12, the nominal
power is 12, etc.).
This function can also switch back to the nominal power, if any hob components
overheat.
You can reactivate the Booster function when the internal components cool down
to safe range. This function will not start automatically.
When you take the pot off the cooking zone when the Booster function in on, a
10-minute countdown will not be interrupted.
