![background image](http://html.mh-extra.com/html/amica/kmc/kmc_instruction-manual_2932482013.webp)
13
OPERATION
Switching on the appliance
When the appliance is switched off then all the
cooking zones are disconnected and the indicators
are off. Touch the on/off sensor field (1) to switch
on the appliance. „0” will appear on all cooking
zone displays (3) for 10 seconds. Select cooking
zone by touching cooking zone selector sensor
field (2) and then slide your finger across the
setting setting selection sensor field (4) to set the
desired heat setting (see Selecting the cooking
zone heat setting).
If none of the sensor fields is touched within 10 seconds, the appliance swit
-
ches itself off.
If child lock function is activated, the appliance cannot be switched on (see
„Releasing the child lock”).
Switching on the cooking zones
Control Panel
When the cooking surface is connected to the
electricity mains, the pilot light should light up
briefly above the child lock sensor field (7), after
which the appliance can be switched on.
No objects should be placed on the sensor fields (this could cause an error).
Touch sensor fields should be always kept clean.
After switching on the appliance using the on/off
sensor field (1) cooking zones can be operated
as follows:
1. Select the desired cooking zone using the cooking
zone selector sensor field (2). (Sensor field layout
reflects the layout of individual cooking zones),
2. To select the desired heat setting, slide your finger
across the setting selection sensor field (4).
3. To change the heat setting again as described in
point 1, select the desired cooking zone using the
cooking zone selector sensor field (2), and then
slide your finger across the heat setting sensor
field (4).
If none of the sensor fields is touched within 10 seconds, the cooking zone
switches off.
A cooking zone is active when a dot is displayed by the number „ ” on the
cooking zone display. This indicates a cooking zone is ready for the heat setting
to be set or changed.
7
2
1
4
2
2
3
3
3
3
2
4
2
2