Amica KF 3038, Operating Instructions Manual

Page: 17 / 20

17
OPERATION, CLEANING AND MAINTENANCE
SPECIFICATION
Dane Techniczne Urządzenia
Type KF 3039 / KF 3038
Rated voltage 220V - 240V ~50Hz
Nominal power 1850-2200 W
Capacity
1,7 l
Boiling water in the kettle is accompanied by noise. This is nor -
mal during rapid heating of the liquid and does not constitute
grounds for complaint.
Warranty
Warranty service as stated on the warranty card
The manufacturer shall not be held liable for any damage caused by improper use of the product.
WARRANTY AND AFTER SALES SERVICE
Manufacturer’s Declaration
The manufacturer hereby declares that this product meets the re­
quirements of the following European directives:
• Low Voltage Directive 2014/35/EC
• Electromagnetic Compatibility (EMC) Directive 2014/30/EC
• ErP Directive 2009/125/EC
• Directive RoHS 2011/65/EC
and has thus been marked with the symbol and been issued with
a declaration of compliance made available to market regulators.
Descaling:
If the appliance switches off before the water boils, it means descaling is required.
You can use standard descaling agents, provided that appropriate instructions are followed. Do not fill
the kettle up to the top mark to prevent spillage, if the descaling agent causes water foaming.
To thoroughly remove any deposits after descaling, boil clean water several times, then rinse the kettle
with clean water.
Cleaning:
Before cleaning, make sure the appliance is disconnected from the power source. Furthermore, it must
cool down completely.
Do not use abrasive or harsh cleaning agents.
Do not immerse the base or the kettle in any liquid. Use a slightly damp, lint-free cloth to clean the
inside of the kettle.
It is recommended to regularly remove limescale deposits from the kettle.
Descaling:
Fill the kettle half-full with tap water and add lemon juice of one lemon.
Bring to the boil and wait 15 minutes. Bring to the boil again and wait further 15 minutes. Bring to the
boil for the third time, empty the kettle and rinse well.